Report inadequate content

20/01/2014

SDH SFP node in a typical ring or mesh network

Temperature, VCC, TX optical power, TX laser bias current, and RX received optical power. The post-amplifier of the LCP-155B4MDRx series also includes a Loss of Signal (LOS) circuit that provides a TTL logic-high output when the received optical level is below a preset LOS Assert threshold.H9MO-LMFE is a carrier-class, cost-effective, compact (only 1U high), STM-1/STM-4/STM-16...

{
}

17/01/2014

SFP+ Cables connectors that provide dependable network

Now available in both SFP+ passive copper and SFP+ active copper configurations; providing an affordable low-power alternative to optical SFP+ Cables. OEM compatibility guaranteed. The single channel SFP+ interface offers a far more compact profile than X2 and XFP and is fully scalable to 10-Gigabit data rates.SFP+ Cables (Direct Attach) Now On Sale [20% OFF] -- Amphenol ...

16/01/2014

10G SFP+ cables which is twinax cable

SFP+ Direct Attach is a copper 10 Gigabit Ethernet solution where the cable assembly connects directly into the SFP+ housing. This active twinax cable contains active electronic components which act to improve signal quality.The BLADE Network Technologies’ SFP+ Direct Attach Cables are specifically designed for the data center, providing affordable, reliable, high speed...

14/01/2014

OptoSpan SFP+ transceiver modules for bi-directional serial optical

SFP + optical transceivers fully supports IEEE 802.3ae 10G Ethernet applications and IEEE802.3aq specification covered. Provides transceiver contains SR (wavelength: 850mm), LR (wavelength: 1310mm) and LRM (wavelength: 1310mm) three configurations, ideal for corporate networks and transmission applications. Each transceiver is equipped with a duplex LC fiber optic interface for...

{
}

13/01/2014

MiniSAS Cables to pull the ring and the quality

MiniSAS Cables product portfolio is based on a new generation of SAS storage I / O system, allowing accordance with SAS 2.1 (6 Gb / s / channel ) and proposed SAS 3.0 (12Gb / s / channel ) industry standard protocol for signal transmission. Micro -SAS HD board density increases linearly , while the maximum bandwidth per port doubled. The product consists of a combination of...

10/01/2014

OM2 Duplex and simplex designs

Multimode optical fiber patch cords can be used as cross-connect jumpers,equipment and work area cords. All Signamax optical fiber patch cords are manufactured using riser-grade (OFNR) cable and are 100% factory tested for insertion and return loss to ensure transmission performance per ANSI/TIA-568-C.3 standard specifications. Patch cords terminated with ST, SC, LC and MT-RJ ...